濟南方便袋：方便袋的制作工藝流程

來源：http://m.yscmbj.com/ 日期：2024-05-21

　　方便袋是怎么制造的，它是我們生活中不可缺少的載物工具，還能根據要求制成各種各樣顏色，那么下面我們就來科普下方便袋是怎樣制作完成的。

How is a convenient bag made? It is an indispensable tool for carrying goods in our daily life and can be made into various colors according to requirements. So, let's popularize how bags are made below.

　　1.它是由線性聚乙烯顆粒融化后制成的，工人將線性聚乙烯與低密度聚乙烯混合于攪拌器中，隨后瘋狂旋轉將它們攪拌均勻，擠壓機將其加熱使其溶化，管狀塑料薄膜便會拔地而起，塑料薄膜管長幾百米，小厚度可達37微米，塑料管逐漸冷卻，隨后輥壓機將塑料管壓平使其更容易處理。

1. It is made by melting linear polyethylene particles. Workers mix linear polyethylene and low-density polyethylene in a mixer, then rotate them wildly to stir them evenly. The extruder heats them to dissolve, and the tubular plastic film will rise from the ground. The plastic film tube is several hundred meters long, with a minimum thickness of 37 microns. The plastic tube gradually cools down, and then the roller press flattens the plastic tube to make it easier to handle.

　　2.隨之將塑料管一分為二分別卷起來，刀將薄膜切成需要的寬度，多余的部分則會被回收到管子里，幾百米長的塑料膜得以生產并上卷，各個卷軸卷起的薄膜量都是一定的，等到卷軸繞滿，薄膜便會被切開。

2. Then divide the plastic tube into two parts and roll them up separately. The knife cuts the film into the required width, and the excess part will be recycled into the tube. A few hundred meters long plastic film can be produced and rolled up. The amount of film rolled up by each roll is constant. When the roll is full, the film will be cut open.

　　3.卷軸向前滾動以便被運到下一個部門，下一個空卷軸會全自動開始上卷工作，這樣一個滿卷的卷軸重達300多斤，可生產出來3萬多個方便袋。

3. The scroll rolls forward to be transported to the next department, and the next empty scroll will automatically start the winding work. This way, a full scroll weighs over 300 pounds and can produce over 30000 convenient bags.

　　4.接下來就是印刷方便袋，此乙醇基油默須不斷循環以保持其黏性，油墨滾筒將圖案印在方便袋上，然后再印另一種顏色，印刷完畢之后，塑料薄膜又會開始重新上卷，輥軸再次卷好后就開始切割方便袋，封口器利用高溫將口封住，旋盤將切好的方便袋套在兩根軸上。

4. Next is the printing of convenience bags. The ethanol based oil needs to be continuously circulated to maintain its viscosity. The ink drum prints the pattern on the convenience bag, and then another color is printed. After printing, the plastic film will start to roll up again. After the roller is rolled up again, the convenience bag will be cut. The sealer uses high temperature to seal the mouth, and the rotary disc will cover the cut convenience bag on two axes.

　　5.而另一邊生產的則是帶密封條的方便袋，密封條由塑料墊片制成，插入頰槽便能密封，密封條是提前生產好的，隨方便袋制作逐漸拉開，密封條經切割后，在特定溫度下黏附方便袋上，這就是加工好的拉鏈式方便袋，這就是方便袋的制作全過程。

5. On the other side, a convenience bag with a sealing strip is produced. The sealing strip is made of plastic gasket and can be sealed by inserting it into the cheek groove. The sealing strip is pre produced and gradually opened as the convenience bag is made. After cutting, the sealing strip is attached to the convenience bag at a specific temperature, which is the processed zipper style convenience bag, and this is the entire process of making the convenience bag..

以上就是有關：濟南方便袋 的介紹，想了解更多的內容請點擊：http://m.yscmbj.com 我們將會全心全意為您提供滿分服務，歡迎您的來電！

The above is an introduction to Jinan convenience bags. To learn more, please click: http://m.yscmbj.com We will wholeheartedly provide you with full score service. Welcome to call us!